Products

48 Fiber In-line/Horizontal Closure HY-10-H-48A


Description

HY-10-H-48A type of fiber closure is a fiber optic cable splice of multiple purposes, which can connect and protect cables. The fiber closures are capable of protecting fiber cable splices in straight-through and branching applications and shall be used in underground, aerial, wall-mounting, pedestal or direct buried, hand hole-mounting and duct-mounting applications. We always devote to the R&D of telecommunication equipment. Our fiber closures can greatly improve the performance of the operation of your network communication system. Closure is suitable for the applications up to 48 single fibers, which can cover most of the applications in the long-distance transmission and local fiber distribution networks, like Fiber To The Home / Fiber To The Curb (FTTH/FTTC). It is suitable for underground, aerial, pedestal or direct buried applications.




Specification

 

Size?mm?LxWxH

465X180X122(mm)

Capacity(cores)

48 single fibers

Weight?kg?

2.5

Airproof type

Mechanical Seal

Entrances

2in/2out

Reinforced core

Steel wire

Suitable cable diameter

Φ8mm?Φ22mm

Material

 PC

Maximum number of trays

2

Capacity  of Tray

Max 24 single Fusion splices

 

 

Technical indexes

(1) Environment Condition:

Environment Temperature: -40??+60?

Atmospheric pressure: 70?106Kpa

(2) Electric property?

Insulation resistance between the metallic elements themselves and between metallic element and the earth is more than 2×104MΩ;

The pressure resistance between the metallic elements themselves and between metallic element and the earth is 15KVDC/1min, Non-puncture, no arc-cover.

(3) Optic property:

The curvature radius of the spare fiber is over 37.5mm; no additional optic attenuation.

(4) Seal Performance:

When the closure is pressurized up to 100kPa and immersed in water for 15 minutes, no air bubbles; or observed for 24 hours, no change of air pressure.

(5) Re-entry Performance:

After 3 times of encapsulation according to the instruction, it still can be up to the seal performance standard.

(6) Mechanical Performance:

After all the following tests, the box and all the components inside don’t change, check through gently or open it if necessary.

When the closures are pressurized up to 60 kPa, it can still meet the seal performance standard after the mechanical performance test

a. can withstand 1000N horizontal pull force;

b. can withstand 3000N/10cm vertical pressure;

c. can withstand 16N·m impact three times;

d. can withstand 50N·m twist force 10 circling times 10 cycles of ±90°twisting angle ;

 

Accessories and tools

Number

Name

Quantity

Application

1

Fiber Protective Sleeve

According to the standard fitting

Fiber fusion and protection

2

Nylon tie

16 pieces

Fixing fiber with protective coat

3

Wire hoop

1 set

Fixing for closure on wire

4

Labeling paper

1 piece

Fiber labeling

5

Insulating tape

1 piece

 

6

Seal fitting

1

Waterproof and sealing

7

Cable End

2 piece

Ending the cable

8

Desiccant

1 piece

Drying

9

Hose Hoops

2 pieces

Fix the cable

10

Ground Wire

1 piece

          

11

Nut Tool

1 piece

Fix nut