Gigabit Ethernet Multiplexer


The  Gigabit Ethernet Multiplexer aggregates 2 port Gigabit Ethernet into 1 port 2.5G uplink, reducing the conversion CAPEX and increasing the fiber utilization effectively. The multiplexer can be used either in point-to-point topology fuctioning as a media converter for transporting two Gigabit Ethernet services over one fiber or in CWDM system working as a wavelength converter for extending the system’s transmits- sion capacity doubly. The multiplexer is equipped with three SFP-based ports: SFP1 is 2.5G uplink port, SFP2 and SFP3 are Gigabit Ethernet service ports.The multiplexer must be used in couples.


The Multiplexer conforms to the following standards:

  • Standerds: IEEE 802.3AB 1000Base-T


  • Fiber Cable:

Molti-mode: 50/125?62.5/125µm

Single-mode: 9/125µm.

  • Data Transfer Rate:

2.5Gbps for SFP1, 1Gbps for SFP2 and SFP3.

  • LED Indicators:

Power, P1 2.5G, P1 Link/Act, P2 Link/Act,

P3 Link/Act, 

  • Power Requirement: 220V(110-245V)AC?50Hz
  • Ambient Temperature: 0 ? 50?
  • Humidity: 5% ? 90%
  • Dimensions: 26×70×93mm?H×W×D?